Description
TheWilliams Sound PPA SelectView FM Receiveris an FM receiver for assisted listening applications. It features a high-resolution OLED screen that provides a quick view of receiver status and immediate entry to all user settings. The receiver has on-screen channel selection with access to 17 pre-set, wideband frequencies (72 to 76 MHz).
The PPA SelectView is digitally synthesized to provide audio clarity and stability and also features digital tuning, digital squelch and battery-saving sleep mode. A belt clip is included.
Features
- OLED high-resolution screen provides a quick view of receiver status
- All user settings are accessible via the on-screen menu – including all 17 wideband channels.
- Stereo headphone jack
- Works with rechargeable or non-rechargeable batteries
- Digital volume controls
- 4-step battery level indication
- Display shows channel or frequency
- Step/seek function allows user to increment channel manually, or seek to the next active channel
- Sleep Mode/Auto-Off saves battery power
- Soft Audio Turn-On
Specifications
| Battery Type | 2x AA Alkaline or NiMH rechargeable |
| Battery Life | Alkaline Batteries: 50 hours, approximate Rechargeable NiMH Batteries (1,500 mAh): 32 hours, approximate |
| Current Consumption | 52 mA, nominal |
| Operating Temperature Range | 32 to 122 F (0 to 50 C) |
| Channels | 17x Wideband, accessed via menu |
| Operating Frequencies | 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz |
| FM Deviation | 75 kHz |
| De-Emphasis | 75 S |
| Screen | 1″ (25.4 mm) OLED |
| Power Indication | Power Button: Backlit green Good Battery Strength: Glows solid Low Battery: flashes |
| Sensitivity | 2 V at 12 dB Sinad with squelch defeated |
| Input Overload | 100 mV |
| Frequency Response | 200 Hz to 15 kHz, 3 dB |
| Modulation | FM, 75 kHz peak deviation |
| Signal to Noise Ratio | Minimum 65 dB @ 1.0 V |
| Antenna | Receive Antenna: Integral with earphone/headphone cord |
| Audio Output | 35 mW maximum at 16 Ohms |
| Headphone Connector | 1/8″ (3.5 mm) stereo jack, mono output for stereo or mono earphones/headphones |
| Power Save Mode | Enters sleep mode after approximately 3 minutes of no RF signal |
| Construction | ABS plastic with aluminum face plate |
| Dimensions | 4.1 x 2.9 x 1.4″ (104 x 72 x 35 mm) |
| Weight | With Batteries: 4.6 oz (130 g) Without Batteries: 2.6 oz (73 g) |
