Description
The EG series was manufactured in Korea in the early 1990s.
The detailed model number is unknown, but based on the various features, it is believed to be the last model of the EG series manufactured in Korea in the early 1990s.
There are some minor scratches and dents scattered throughout, and the metal parts are dull.
The overall appearance is slightly used, but the playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.
Country of manufacture: Korea
Case: Non-genuine soft case
Weight: 4.45kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.9mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: D’Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment
Specs: D’Addario EXL110 / .010-.046 set.
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Country of manufacture
Korea
Case
Non-genuine soft case
Weight
4.45kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
43.0mm
Neck thickness near 1st fret
20.9mm
Neck thickness near 12th fret
22.9mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
D’Addario EXL110 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment
