Description
The BFV-58V is a replica of the 1958 Corinna V.
The original is made of Korina wood, but with mahogany body, mahogany set neck, and rosewood fingerboard.
The bridge plate, back-through construction, and other features of the period are well reproduced in this model. This 1958-spec V-type is very lightweight and easy to handle.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.
There are some chinks and minor rust on the gold parts, but there are no corner chips characteristic of deformed guitars, and it is in good condition with only minor scratches and small dings.
Item rank: B+ (Good)
Truss rod: Nearly fully tightened
Fretboard: 60-70%.
Accessories: Gig bag/not genuine
Weight 2.75kg
Serial No serial number
Truss Rod : No problem, confirmed up to 60 degrees left and right (loose, little remaining).
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|22.5mm
Neck thickness (near 12th fret)|23.2mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above the 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
43.7mm
Neck Thickness (near 1st fret)
22.5mm
Neck Thickness (near 12th fret)
23.2mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
