Description
Quilted maple top with ash back and original Lakland bridge with oval bass plate.
ME-3 preamp with Duncan-designed MM -J Config.
See-through pink with quilted maple grain, gold parts, and white pearl pickguard show Tetsuya’s sense of design.
* After our arrival, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, and parts replaced, so it is in good playing condition.
The gold parts have some scuffs, and there are other minor scratches, small dents, and other signs of use.
Item rank: B+ (Good)
Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin JAPAN
Weight 4.40kg
Serial KL1229604
Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.6mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|46.0mm
Neck thickness(near 1st fret)|22.5mm
Neck thickness (near 12th fret)|24.5mm
SCALE|889mm (35″)
RADIUS|305mm (12″)
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.6mm above 12th fret
String height (treble string side)
2.0mm above 12th fret
Nut Width
46.0mm
Neck Thickness (near 1st fret)
22.5mm
Neck Thickness (near 12th fret)
24.5mm
Scale
889mm (35″)
RADIUS
305mm (12″)
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement
