Description
Vanzandt STV-R2 is mounted with 100% handmade Vanzandt pickups in Texas, USA, and produced at a factory in Japan (PGM) under the motto ” Neo Vintage “.
It has an ultra-thin lacquer finish, alder body, maple neck, rose fretboard, 210R/22 frets, and Vanzandt TRUE VINTAGE SET PU.
The ease of use of the STV series/22nd fret, the vintage taste of the Vanzandt pickups, and the atmospheric looks make this guitar an attractive one.
The entire body area has been sanded. It shows signs of use (dents around the body, scuffs and scratches, minor scratches, picking marks, fogging and bits on metal parts and screws, and other exterior damage).
The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be adjusted to +/- 60 degrees.
Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 9163
Country of manufacture: Japan
Case: Soft case
Accessories: Arm and manual
Weight: 3.37kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Scale: 648mm (25.5″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
9163
Country of manufacture
Japan
Case
Soft case
Accessories
Arm, instruction manual
Weight
3.37kg
Truss Rod
No problem, rod checked up to 60 degrees left and right
Fret remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.3mm
Scale
648mm (25.5″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
