Description
The CE24 is a bolt-on, Japan-only model with an alder body back, maple top, rosewood fingerboard, and satin finish.
It is equipped with two modern type 85/15 pickups newly released in 2015, and has a wide range from low to high, a humbucker sound that can be pulled out even when deeply distorted, and a crisp single-coil sound when the tone knob is pulled. It can be used in all kinds of situations.
* After arrival at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.
There are scratches and paint shining by picking next to the pickups, and overall there are some minor scratches and small dents.
Item rank : B+ (Good)
Year of manufacture : 2015
Truss Rod There is enough room
Fret: 60-70%.
Accessories Soft case / Genuine arm
Country of Origin USA
Weight 3.42kg
Serial 15 224866
Truss Rod: No problem, confirmed up to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|22.5mm
SCALE|635mm (25″)
RADIUS|254mm (10″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs Specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.4mm
Neck Thickness (near 1st fret)
21.5mm
Neck Thickness (near 12th fret)
22.5mm
Scale
635mm (25″)
RADIUS
254mm (10″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
