Description
It has a 3-dimensional arched SR body made of African mahogany with a center panga-panga wood top sandwiched between two wings of ash wood. It has rich mid-low range characteristics essential for bass sound and hard wood attack and crisp high range characteristics.
Equipped with Nordstrand “Big Single” pickups, the 3-band EQ with 3-band tone control for Bass/Mid/Treble and 3-way Mid frequency switch enable you to create a variety of sounds.
* After receiving this guitar, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and mortise and tenon adjustment.
The neck is in good playing condition, as it has been adjusted by fret adjustment due to some rippling symptoms.
There are some minor scratches and dents.
Item rank: B+ (Good)
Year of manufacture: Made in 2016
Truss rod : Plenty of room
Fret: 60-70%.
Accessories Soft case / Non-genuine
Country of Origin Indonesia
Weight 4.16kg
Serial 160312071
Truss rod: No problem (slight waviness)
Fret height is sufficient.
String height (bass string side)|2.7mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|44.8mm
Neck thickness(near 1st fret)|19.3mm
Neck thickness (near 12th fret)|21.3mm
SCALE|864mm (34″)
RADIUS|305mm (12″)
Strings for setup|D’Addario / .045-.130 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs Specs
Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.
Fret Remaining
No problem, there is enough fret height.
String height (bass string side)
2.7mm above the 12th fret
String height (treble string side)
2.0mm above 12th fret
Nut Width
44.8mm
Neck Thickness (near 1st fret)
19.3mm
Neck Thickness (near 12th fret)
21.3mm
Scale
864mm (34″)
RADIUS
305mm (12″)
Strings for setup
D’Addario / .045-.130 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment
