Description
Osaka Guitar Workshop Infinite stands out for its 628mm scale, small chrysanthemum logic, and other creative specifications.
The top is made of distinctive spotted maple and wenge, the body back is a two-piece alder body, and the neck is flamed and loctite maple.
The pickups are equipped with BARE KNUCKLE BOOT CAMP, and the mini-switch allows three types of sound switching: parallel, tap, and series for the front and rear PUs, respectively.
* After our arrival, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, and strap pins replaced, so it is in good playing condition.
It is in good condition with only minor scratches.
Item rank: A (Beautiful)
Truss rod: There is room to spare.
Fret: 60-70%.
Accessories: Gig bag / Non-genuine Non-genuine arm
Country of origin: Japan
Weight 3.37kg
Serial 1081
Truss Rod : No problem, confirmed up to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|22.1mm
Neck thickness (near 12th fret)|23.7mm
SCALE|628mm (24.75″)
RADIUS|254mm (10″)
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, strap pin replacement
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.0mm
Neck Thickness (near 1st fret)
22.1mm
Neck Thickness (near 12th fret)
23.7mm
Scale
628mm (24.75″)
RADIUS
254mm (10″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, strap pin replacement
