Description
Audix R41KITOverview
TheAudix R41 Kit-Bis a Performance Series single-channel UHF diversity receiver designed to deliver enhanced range and easy configuration for musicians, vocalists, presenters, and public speakers in houses of worship, concert venues, conferences, and live stage applications. It offers 106 pre-coordinated frequencies across 32 MHz of bandwidth in the 554 to 586 MHz frequency band. Use one wireless microphone (available separately) from up to 300′ away. One-touch sync and auto scan functions provide simple and efficient setup.
The high-contrast LCD shows a host of information such as battery level, frequency, and AF/RF signal strength, which can be optimized via adjustable AF and RF gain. XLR and 1/4″ outputs allow compatible connectivity with the balanced or unbalanced inputs on your mixing console. The R41 Kit-B ships with two antennas, a carrying case, an audio cable, one power supply, and a rackmount kit.
Incorporate up to 16 systems to use 16 unique channels simultaneouslySingle-channel receiver supports one wireless microphone32 MHz wide spectrum tuning106 pre-coordinated frequenciesHigh-contrast LCD shows RF and AF signal strength, group/channel/frequency, level/squelch, battery level, and moreOne-touch sync via infraredOne-touch scan eliminates inefficient manual tuningGround-lift switch helps eliminate ground loops or humMetal strain relief for power cableAdjustable AF and RF levelSelectable lock function prevents the transmitter from being accidentally muted or powered off
Audix R41KITSpecs
| Frequency Band | 554 to 586 MHz |
| Bandwidth | 32 MHz |
| # Of Simultaneous Systems | Up to 16 |
| Switchable Frequencies | 106 pre-coordinated frequencies |
| Wireless Range | Up to 300′ / 91 m |
| Antenna Connector | 2 x BNC (8 VDC, 150 mA) |
| Outputs | 1 x XLR 3-pin balanced 1 x 1/4″ TS unbalanced |
| Audio Output Level | XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4″: -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain |
| Audio Level Control | -12 to +9 dB in 3 dB steps |
| Frequency Response | 45 Hz to 18 kHz |
| Compander | 2:1 |
| Pilot Tone | 32 kHz |
| Receiving System | Single tuner, antenna diversity |
| Signal to Noise Ratio | 105 dB at 30 kHz deviation (A-weighted) |
| Total Harmonic Distortion (THD) | 0.7% (33 kHz deviation at 1 kHz) |
| Sensitivity | 5 dBV (S/N 60 dB at 25 kHz deviation, A-weighted) |
| Power Requirement | 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A |
| Dimensions (W x D x H) | 8.1 x 8.1 x 1.7″ / 205 x 206 x 44 mm |
| Weight | 1.9 lb / 0.9 kg |
