Description
Japan Vintage, manufactured in 1980, RSB series old type, through-neck type is in stock.
It consists of 5-ply maple, walnut neck, ash body, and rosewood fingerboard. The pickups are equipped with MB-II double coil pickups. Serial and parallel outputs can be switched by mini-switch.
Converted to fretless.
There are strap pin mounting holes on the back of the body.
Pickup mount sponge has been replaced as it is not adjustable due to deterioration.
Pegs are a little sticking.
Overall, there are scratches, dents, and rust on the metal, showing signs of use.
The neck is twisted and wavy, but there are no problems with playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: 002036
Year of manufacture: 1980
Case: Non-authentic soft case
Weight: 4.36 kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
String Height Bass String Side: 3.0mm above 12th fret
String height on treble string side: 2.5mm above 12th fret
Nut width: 45.5mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 25.5mm
SCALE: 864mm (34″)
RADIUS: 254mm (10″)
Strings in setup: D’Addario ECB81 / .045-.100 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, fingerboard correction, fingerboard side burr removal, PU mount sponge replacement, one cavity screw hole crack correction, bridge saddle sticking correction, rod cover screws x 3 looseness correction
Specs
Item Rank
B: Fairly scratched and used, but no problem in normal use.
12 months old
Serial No.
002036
Year of manufacture
1980
Case
Non-Genuine Soft Case
Weight
4.36kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
String Height Low String Side
3.0mm above 12th fret
String height on treble string side
2.5mm above the 12th fret
Nut Width
45.5mm
Neck thickness near 1st fret
22.5mm
Neck thickness near 12th fret
25.5mm
Scale
864mm (34″)
RADIUS
254mm (10″)
Strings for setup
D’Addario ECB81 / .045-.100 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, fingerboard correction, fingerboard side burr removal, PU mount sponge replacement, crack correction in one cavity hole, bridge saddle adhesion correction, rod cover screws x3 looseness correction
