Description
JB75-90US with USA pickups, reproducing mid-70s specifications.
Ash body with maple neck maple fretboard, featuring neck binding and block inlays.
This bass has a fat and punchy bass and bouncy treble, and is very compatible with the slap technique.
There are scratches, dents, and dull parts.
The neck is a little twisted and has some high bends, but it has been set up and is in playing condition.
The pickguard has been replaced and the pickups have been replaced with Bartolini 9ST pickups.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: CIJ O076336
Country of manufacture: Japan
Case: Hard Case
Weight: 4.58kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.4mm
SCALE: 864mm (34″)
RADIUS: 184mm (7.25″)
Strings in setup: D’Addario EXL165 / .045-.105 set0
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
Specs: D’Addario
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
CIJ O076336
Country of manufacture
Japan
Case
Hard case
Weight
4.58kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Leftover frets
No problem, there is enough fret height
String Height Low String Side
2.5mm above 12th fret
String height on treble string side
2.0mm above the 12th fret
Nut width
38.0mm
Neck Thickness near 1st Fret
21.1mm
Neck thickness near 12th fret
24.4mm
Scale
864mm (34″)
RADIUS
184mm (7.25″)
Strings for setup
D’Addario EXL165 / .045-.105 set0
Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
