Description
KG-Serpent is an entry-level model based on KG-Fascist.
Basswood body with a soft sound with a fuller midrange.
It has simple controls: pickup selector, one volume, and direct switch.
There is a ding with paint crack near the jack.
There are other scratches, dents, and dull parts.
The neck is currently set up with a slightly higher string height.
There are no sound clogging, and there are no problems with playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: No description
Case: Original soft case
Weight: 3.50kg
Truss Rod: Note that the rod has been checked up to 60 degrees to the left and right, and there is no problem (with waviness).
Fret Residue: Defective, need to consider replacing next time when repairing.
String height on bass side: 2.2mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
Specs
Item Rank
B: Fairly scratched and used, but no problem for normal use.
12 months old
Serial No.
No description
Case
Genuine soft case
Weight
3.50kg
Truss Rod
No problem (with a waviness)
Remaining frets
Defective, need to consider replacing the frets at the next repair.
String Height Low String Side
2.2mm above the 12th fret
High string side
1.7mm above the 12th fret
Nut width
43.0mm
Neck thickness near 1st fret
19.9mm
Neck thickness near 12th fret
22.5mm
Scale
648mm (25.5″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair
