[SN 8747] USED momose momose / MJM1-STD Maple Fingerboard Red [20]

Description

This JM type model with an alder body is manufactured by Momose, a company that produces high quality instruments by craftsmen in Matsumoto City, Nagano Prefecture.
The wide pickup construction and the position of the tailpiece give it a milder sound than the ST and TL.
It was preferred by SURF music guitarists rather than JAZZ guitarists, but recently it has been widely used for ROCK and POPS.
Although this design tends to produce a loose sound, the tight construction of the MOMOSE makes its charms apparent.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are some signs of use such as minor scratches and small dents.

Item rank : B+ (Good)

Year of manufacture : 2018
Truss Rod There is room to spare
Fret: 60-70%.
Accessories Gig bag / Genuine arm
Country of Origin Japan
Weight 3.42kg
Serial : 8747

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.8mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|23.4mm
SCALE|648mm (25.5″)
RADIUS|184mm (7.25″)
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.8mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
23.4mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment