Description
5000 Series body-pack transmitter with cH-style screw-down 4-pin connector.
Select a microphone or cable with a cH-style screw-down 4-pin connectorto use with the ATW-T5201 body-pack transmitter.
- Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
- Rugged cH-style connector provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector
| Overall System | |
|---|---|
| Operating Frequencies | Band DE1: 470.125 to 590.000 MHz Band EG1: 580.000 to 699.875 MHz Band GH1: 700.125 to 819.875 MHz Note that some frequency bands might not be available in country or region in which you live, or could come with a |
| Minimum Frequency Step | 25 kHz |
| Modulation Mode | FM |
| Maximum Deviation | 40 kHz (THD:10%) |
| Frequency Response | 23 to 16,300 Hz Depending on attached microphone element. |
| Operating Range | 100 m (328′) Open range environment with no interfering signals. |
| Dynamic Range | Mic input: 120 dB or higher (A-weighted), typical Inst input: 107 dB or higher (A-weighted), typical |
| Total Harmonic Distortion | 1.0 % or less (at 1 kHz, 17.5 kHz deviation) |
| Operating Temperature Range | -5C to +45C |
| Body Pack | |
| RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms May differ depending on the country or region in which you live. |
| Battery Life | High: 7 hours, Mid: 9 hours, Low: 10.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
| Battery Type | Two 1.5V AA, not included |
| Dimensions | 64 mm 70 mm 17 mm (W D H) |
| Input Connections | Pin 1: GND Pin 3: MIC INPUT Pin 2: INST INPUT Pin 4: DC BIAS +10 V |
| Net Weight | Approx. 92 g |
| Spurious Emissions | Following federal and national regulations |
